Our Solution

1. The Interview wall with the iron and stone background was made with river stones with a length of between 8-12 cm. We arranged the stones one by one so that they looked tight and neat. The iron we used to hold this iron is L iron finished with black paint, and wiremesh which is also coated with black paint.
2. The wall, which is integrated with the stone iron wall, is divided into two parts where the lower part uses plywood covered with 3 mm sungkai plywood and finished with melamic paint and the upper part is finished with paint with cement patterns.
3. The podcast table is made of plywood covered with 3 mm teak plywood and finished with melamic paint. The frame of the table is made of hollow iron and finished with duco paint brand petalac type P 002 (Black).
4. The background wall on the podcat table is finished with plywood coated with HPL brand taco with type X 0019 SU (Cassa Forma) which is divided carefully so that it looks symmetrical but has an industrialist element. Finisihing Nut between wall parts is finished with paint duco.
5. The iron shelf separating the room is made of Hollow iron and finished with paint paint with the Petalac brand type P 002 (Black).
6. What's interesting about this design is the wafer board as an accent wall, where the neon logo "TODAY MESSAGE" is attached. We brought this wafer board specially from Surabaya because this wafer board is imported from abroad.

Tantangan terbesar kami dalam proyek ini adalah penyusunan batu kali. Penyusunan ini harus dilakukan dengan ketelitian dan kesabaran sehingga batu-batu kali ini bisa tersusun dengan rapi dan masih terlihat indah dengan kombinasi wire mesh.  Tantangan kedua kami dari pembuatan dinding ini adalah menjaga kerapihan wire mesh sehingga wire mesh tidak terlihat menonjol akibat tekanan dari batu. Oleh karena itu, kami harus mencoba Menyusun batu beberapa kali sehingga membuat wire mesh juga terlihat rapi.